Chatillon
integral load cell force gauge in six capacities from 2 to
500 lbs. - The DFIS force gauge offers the same accuracy and digital
data communications capabilities as the full-featured DFGS series
in an economical and user-friendly digital force gauge product.
The four basic keypad functions provide for minimal operator training
in production floor or laboratory environments. The internal
digital sampling rate of 1000 samples per second provides a high
level of accuracy in all but the most demanding force peak applications.
Operation Features:
- Internal digital sampling rate
of 1000 samples per second
- Peak function automatically captures
and stores highest instantaneous reading within each test.
The peak function may be engaged prior to testing to freeze the
display at the highest reading. It may also be engaged after
the test to display the peak value stored. The "zero" key
clears peak memory.
- Tension/compression modes are
indicated by "T" for tension or "C" for compression
upon force application. In the digital output, tension values
are identified with a minus sign
- Selectable units of measurement:
lb, kg or N
- Push button calibration
- Rechargeable battery or AC operation
allows 8 hour continuous battery operation with 12-14 hour charge.
Low battery indicator on display. Continuous AC operation via
charger/AC adaptor
- Available for 110 VAC or 220 VAC
Output/Interface
Features:
- Bi-directional RS232 interface
for data transmission as well as peripheral control of all gauge
keypad functions. Digital data transmission up to 75 data
points per second may be accomplished via the interface. Data
transmission parameters are user-selectable. (Baud rates
from 300 to 19,200). The DFIS may also be interfaced with
a Chatillon TCD-200
digital test stand so that both gauge and stand may be peripherally
controlled.
- Mitutoyo output (modified BCD)
for use with Mitutoyo brand processors
- Analog Output: 0 to ±2.3 VDC full
scale (approximate)
Physical
Design Features:
- Die cast metal reversible housing.
Split housing design permits upright display whether gauge is
hand held or test stand mounted.
- Easy to read 1/2" high LCD
display with 4-1/2 digits for forced value. Smaller characters
within the display indicate units of measurement, test mode
and
low battery
- 4 key membrane keypad with separate
on/off switch
- 2 separate rear mounting hole
patterns: (2) #10-32 thread holes for light duty stands, or
(4)
1/4-20 thread holes for heavy duty stands.
- Removable load cell shaft: 2
lb through 100 lb: #10-32 thread, 200 lb & 500 lb: 5/16-18
thread
- Side holes for optional threaded
handles
- Output connector: 12 pin "Hirose" design
Standard Accessories:
Stainless steel attachments include
a flat head, hook, cone, chisel and extension rod. Gauge, battery
charger, attachments, Allen wrench and operation manual are furnished
in a cushioned carrying case.
Accuracy: ±0.15% of full scale
±1 LSC (least significant count)
Tare Capacity: 10% of full scale in pound mode
Full Scale Deflection: 0.010"
Temperature: 40° to 110°F (5°C to 45°C), Stability: 0.03%
per °F
Weight: Instrument: 2 lbs (6 lb shipping weight)
|
Click here for
additional
specifications
(Adobe PDF)
|
