|
The TI-500E is an NTEP approved digital indicator housed in a durable black ABS enclosure. It is
equipped with a large easy to read 0.6” LED display. Capable of powering up to 4-350Ω load cells,
this simple device can handle a multitude of functions. A full duplex RS-232 port can transmit data
on demand or continuously to match the input requirements of a wide variety of peripheral devices
including printers, remote displays and computers. The setup and calibration parameters are
shared with other TI series indicators for consistently easy and trouble free use and maintenance.
The TI-500E is the leader in reliable performance and value.
- This scale indicator is included
with Inscale Digital Floor Scales
and Inscale Utility Drum Scales
- High Quality / Low Cost
- NTEP Approved for 5,000 Divisions
- ABS NEMA 12 Enclosure
- Full Duplex RS-232 Serial Port
- Simple Piece Counting Function
- Displays up to 50,000 graduations
- Drives up to four 350Ω Load Cells
- Full Front Panel Configuration
- Stainless Steel Swivel Stand
- Operates on AC Adapter or 12 Volt DC
Specifications:
- Load Cell Excitation: +10 VDC
- Load Cell Current: Drives up to four 350Ω Load Cells
- Analog Signal Input Range: 0.2 mV/V min to 3.0 mV/V max
- Analog Sensitivity:
0.4 μV/grad, minimum
1.0 μV/grad recommended minimum for Legal-for-Trade
- A/D Conversion Rate: Up to 25 meas/sec
- A/D Resolution: Up to 260,000 Internal Counts
- Display: 0.6”, 6 Digit LED Display
- Display Resolution: Up to 50,000 External Grads, Selectable
- Key Functions: Units, Zero, Net/Gross, Tare, Print
- Annunciators: Gross, Net, kg, lb, Center of Zero, Stable, Tare,
Negative, PCS
- Serial Port: Full Duplex RS-232 Format
- Power Requirement: 12 VDC, 500 mA Wall Adapter, Included
- DC Power Consumption: 200 mA + 30 mA/350Ω Load Cell
- Operating Temperature: 14oF to 104oF (-10oC to 40oC)
- Indicator Dimensions: 3.2” x 6.8” x 2.3”
- Warranty: 1 Year Warranty
- NIST Classification:
H-44 Class III at 5,000 Divisions
C.O.C.#94-080A2
<<Back
to Floor Scales>> |
